Ariens 920402 - Sno-Tek 24E Manual do Operador descarregar pdf (Página 9)

EN – 8

DRAINING FUEL SYSTEM

1. Move unit to an open, well-ventilated area with no

flames or sparks.

2. Remove cap from fuel tank and siphon fuel into a

clean gasoline container.

3. Reinstall cap onto fuel tank and tighten.

4. Start engine to burn remaining fuel in fuel system and

leave engine running until it “runs dry” and stops.

Refer to Operator’s Manual for engine start procedure.

5. Stop engine, remove key and close fuel valve.

SERVICE POSITION

See Figure 2.

IMPORTANT: NEVER store unit in service position.

WARNING: AVOID INJURY. Before placing unit

in service position, close fuel valve and drain fuel

from tank and fuel system. See Draining Fuel

System on page 8. Make sure unit is secure and

will not tip.

Figure 2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Sem comentários

Ariens 920402 - Sno-Tek 24E Manual do Operador Página 9